#Can i get a dimmer for led lights full#

If it is too hot to touch, something is wrong, and you should call a qualified electrician.ДЄ dimmer has fins (or heat sinks) located on the sides to help dissipate heat out and away from it. It is normal for a dimmer to get warm to the touch. Is it normal for my dimmer switch to get warm? Is this safe? Normal dimmers send a signal to dim the line voltage (120V) side of the power supply. It dims the low voltage side of the power supply by sending a 0-10 volt signal from the dimmer switch to the power supply and requires two extra low voltage wires going to the dimmer. Incandescent wonвЂ™t work on low voltage and vice versa.Д -10V dimming works with a power supply specifically design to accept 0-10V dimming.

The specifications for the product you are trying to dim will mention what type of power supply is used, and you need to match the dimmer type up to that. low voltage electronic or low voltage magnetic). If you are dimming a low voltage (12V or 24V) system or fixture you will need to use the appropriate low voltage dimmer (i.e. Special вЂњwarm dimвЂќ LED lights that mimic the dimming color change of incandescent lights and halogens are becoming more popular.Д®xamples of recommended LED bulbs and dimmer compatibility charts:Д¬an I use an incandescent dimmer with low voltage lighting (like halogen and LED)?

Check manufacturer specifications to see if the fixture is dimmable and, if so, which dimmers are compatible.Д«e aware that while incandescent and halogen lights take on a warmer hue as you dim them, most LED lights stay the same color or take on a cooler hue when you dim them. Many light fixtures now have integrated LED light sources, rather than requiring a separate bulb. Bulb manufacturers also post lists of their own to indicate which dimmers are compatible. Dimmer manufacturers post lists of their compatible dimmers that they have tested to ensure that their dimmer will work with that bulb. Not all LED and CFL bulbs are dimmable the manufacturerвЂ™s specifications for a particular LED or CFL bulb will tell you if it is. This doesnвЂ™t work with all dimmers and switches, though, so you need to check the specifications to ensure it works properly.Д¬an I dim LED or fluorescent light bulbs? If using a product like their Paddle switch, for example, you can place that on one end of the switch leg and then use the compatible dimmer on the other end. However, LegrandвЂ™s switches do act as both a single pole and 3-way. 4-way dimmers go in between 3-way dimmers for a 3rd door. 3-way dimmers are used for top of stairs and bottom of stairs or at two different doors same room. You need to select the compatible 3-way switch that goes with your multi-location dimmer.Д¬an you use a 3-way dimmer in a single-pole application? Dimming a fixture 20% saves 20% in energy-simple as that!Д¬an I use a standard 3-way switch with a multi location dimmer?

#Can i get a dimmer for led lights full#

Having a fixture on a dimmer at its full brightness level saves 4-9% in electricity. What are the advantages of using dimmers?Дimming your lights not only allows you to create the mood and atmosphere of a room but it also saves energy and the lifetime of the bulbs inside the fixture. You must also consider if the fixtures can be controlled by one or more locations (single pole dimmer or 3-way, etc.). If located in the middle with other devices on either side, a 600-watt dimmer becomes a 400-watt dimmer. If the dimmer is located on the end of the box, your 600-watt dimmer becomes a 500-watt dimmer. Keep in mind that when you put multiple dimmer switches in the same box, you de-rate the dimmers down.

For example, if you have ten recessed cans that are 50 watts each, you will need at least a 600-watt dimmer to carry that load. Some other key points to keep in mind when selecting a dimmer is how much of a load you will be putting on the dimmer.

Check the dimmer and fixture/bulb specifications and instructions to know. Not all bulbs are dimmable, and not all dimmers dim all bulbs. ItвЂ™s important that the dimmer matches up to the fixture technology in order for it to work properly ( line voltage, low voltage magnetic, low voltage electronic, 0-10V LED, or fluorescent power supplies). Parallax LED Linear Suspension by Tech LightingД®ach dimmable fixture has certain technology within it that determines the type of dimmer to use.